6
XL-DB20014UM-en-US Rev – · 2015-07-29 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Mounting Instructions
7. Mounting Instructions
1. Use a mounting structure of sufficient
strength to support the rated capacity
of the drawbar in accordance with SAE
J849 and SAE J847 respectively.
2. Install the drawbar in compliance
with all federal, state, or local agency
regulations or laws governing the
installation and use of the product.
Consult with these agencies prior to
installation or use.
3. Remove and retain the cotter pin
(XB-121)
(Figure 1)
.
4. Remove and retain the castle nut
(XB-T-316-A)
(Figure 2)
.
5. Remove and retain the washer
(XB-T-318)
(Figure 3)
.
6. Mount to appropriate structure
(Figure 4)
.
Figure 1
Figure 3
Figure 2
Figure 4
XB-T-316-A
XB-T-318
.38" (9.5 mm)
MIN
x 45˚
CHAMFER ON MOUNTNG
STRUCTURE
TRAILER STRUCTURE
6.0" (152.4 mm)
Ø2.03"
(56.1 mm)
MOUNTING
HOLE
XB-121
