SAF-HOLLAND FW35 Series Owner'S Manual Download Page 13

Page: 13 / 32

XL-FW10009UM-en-US Rev F · 2021-06-16 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND,
HOLLAND, SAF, and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.

Operation Instructions

Failure to stop and properly

lock the tractor and trailer

brakes could cause

uncontrolled sliding of the

fifth wheel which, if not

avoided, could result in

component damage to

the tractor or trailer.

3. Release the slide locking plungers by

moving the cab switch to the unlock

position

(Figure 24)

. If equipped with

manual slide release (Traditional

Sliders only), pull the release lever. If

the plungers DO NOT come out, lower

the landing gear to relieve pressure on

the fifth wheel. This will allow the fifth

wheel to slide easier.

NOTE:

Cab switch style may differ by OEM.

4. Visually inspect and verify that the

plungers are disengaged.



Figure 25 - ILS Sliders



Figure 26 - Severe-Duty Sliders



Figure 27 - Traditional Sliders

5. Release the tractor parking brake while

keeping the trailer brakes engaged.

6. Slowly drive the tractor forward or

backward to position the fifth wheel.

Stop the tractor at the desired position.

Figure 25

RACKS

PLUNGERS RETRACTED

Figure 24

AIR OPERATED

MOVE CAB SWITCH TO

UNLOCK POSITION

Figure 26

UNLOCKED

(DISENGAGED)

UNLOCKED

(DISENGAGED)

ILS SLIDERS

RACKS

PLUNGERS

RETRACTED

LOCK INDICATORS

POINT TO UNLOCK

SYMBOLS WHEN

DISENGAGED

SEVERE-DUTY

SLIDERS

Summary of Contents for FW35 Series

































Search results

Summary of Contents for FW35 Series

Reviews:

Related manuals for FW35 Series

Brands by name

Popular brands

SAF-HOLLAND FW35 Series, Owner'S Manual

Search results

Summary of Contents for FW35 Series

Reviews:

Related manuals for FW35 Series

Brands by name

Popular brands