A primary air inlet is situated on the rear of the appliance to facilitate regulation of the air supply and
the
post-combustion air via the openings above the glass. These can be regulated by means of the knob
of the
air slider on the right, behind the cover plate. Another marking is visible on the upper end of the rear.
The stop to the right is position “0”, and indicates no air supply. The stop to the left is position “l”, and
indicates maximum air supply. The central position therefore indicates a 50% air supply. After a while,
you
will instinctively know how to use the appliance most effectively by setting the corresponding positions
of the
primary air slider and the combustion air inlet.
52
Operation of the combustion air inlet
For more accurate control of the burning up of the fuel, an additional combustion air inlet is located
underneath the grate, against the rear wall inside the appliance. This inlet can be adjusted with the aid
of the