16
Open the secondairy air inlet : see last column in table “General”
The secondary air is used to burn the solid particles in the smoke. This reduces
the exhaust and raises the efficiency.
12. Heating
The heating itself can only be done with the front door closed! Even when the
stove is not working, the front door should stay closed.
12.1
Lighting
Ensure maximum air supply when lighting the stove (air lever in start position).
Put a good layer of kindling on the grate of the stove. Put two larger woodlogs
on top of it. Put some firelighters in between and light them. Close the fire door
and open the air inlet completely (position IIII).
Watch out: If 15 minutes after lighting there is still a backdraught of flue gases
because of the weather conditions (strong wind or fog, for example) the lighting
should be stopped until the weather improves.
12.2 Heating with firewood
For the appliance to reach the desired temperature quickly without too many
undesirable emissions, after lighting you should follow the following heating
procedure:
As soon as the kindling is burning well you can put a wood block (max. Ø 14 cm)
into the firebox.
Then set the combustion air handle to the desired position: small or large flames
for nominal or maximum power!
English
Summary of Contents for Accent
Page 2: ...2 ...
Page 7: ...7 5 Parts English ...
