background image

18

Precautions and warnings “after” the use of equipment

- Turn off the main switch of the chair when it is not in use for an extended period of time.

- Always maintain the equipment clean for the next operation.

- Do not modify any part of the equipment. Do not disconnect the cable or other connections 

without need.

Precautions and warnings during the “cleaning” of equipment

- Before cleaning the equipment, turn off the main switch.

- Avoid spilling water or other liquids inside the equipment, which could cause short circuits.

- Do not use microabrasive material or steel wool when cleaning, or employ organic solvents or 

detergents which contain solvents such as ether, stain remover, etc.

- In order to avoid environmental contamination or undue use of the Equipment after it has become

useless, it should be discarded in the suitable place (as per the local legislation of the country).

- Pay attention to the local legislation of the country for the conditions of installation and disposal

of residue.

Precautions to be adopted against foreseeable or uncommon risks, related to

the deactivation and abandoning of equipment

- If the equipment has any abnormality, check if the problem is related to any item listed in the 

topic  of  unforeseen  events  (failures,  causes  and  solutions).  If  it  is  not  possible  to  resolve  the 

problem, turn off the equipment, remove the power supply cable from the socket and contact your 

representative (Alliage).

Precautions in case of alteration in the functioning of equipment

Manufacturer shall not be responsible for: 

- Use of the equipment differing from that for which it is intended.

- Damages caused to the equipment, the professional and/or the patient by the incorrect installation

and erroneous procedures of maintenance, differing from those described in these Instructions for

use which come with the equipment or by the incorrect operation of it.

PRECAUTIONS, RESTRICTIONS AND WARNINGS

Summary of Contents for 40L

























Reviews: