11
1. Turn on the main switch.
When you turn on the device, the last program you used is set in the standby mode.
2. Press the operation direction button ( ) on the control box to select the operation direction.
Operation direction is forward and reverse. During the reverse operation, it beeps continuously.
(Sounds let the user know the operation direction.)
3. Press the irrigation button ( ) on the control box to select the irrigation mode.
4. Press the speed button ( ) to set the speed. (▲) button for increasing speed, (▼) button for decreasing speed.
Keep pressing speed button to change rapidly.
5. Press the torque button ( ) to set the torque.
(▲) button for increasing torque, (▼) button for decreasing tor
que.
6. Start operating by pushing the foot controller
Speed depends on how much you push the foot controller.
Irrigation pump operates when the irrigation pump button is on.
■ Program setting
1. Press the program button ( ) on the control box to select the program number. Program number increases
each 1 stage in order. The program returns to number 1(PRG:1) after number 3(PRG:3).
2. After setting the desired value by referring to the operation method, keep pressing program memory button ( )
for 2 seconds. Program is memorized with beep sound.
■ Error and Remedy
: In case of stopping Handpiece by not working & using error, each error code may be shown below.
OPERATION PROCESS
Error
Warning !
Torque Limit
Warning !
Foot pedal Check
Cause: Torque is overloaded than the setting values during the surgery.
Cause: Faulty foot controller connection or damage
Remedy: Reconnect the foot controller cord properly.
Contact the manufacturer if the remedies do not activated.
Remedy: Press the foot controller to release the error.
Contact the manufacturer if the remedies do not activated.
Cause & Remedy
