25
DHD-1 Digital Hand Dynamometer – Service and Warranty Information
Service Tips
The
SAEHAN
DHD-1 Digital Hand Dynamometer is designed to provide
many years of dependable service with minimal maintenance. To make sure the
device is reading accurately, we suggest occasionally making the few checks
listed below. If you detect a problem, return the device for service. Store the
device in a safe location to prevent inadvertent damage using the case provided
with the DHD-1.
LCD Display
The DHD-1 features digital load cell technology which eliminates the
possibility of oil leakage associated with hydraulic hand dynamometers.
However, if the LCD display does not work properly, the DHD-1 should be
returned to your supplier or to
SAEHAN
for inspection and repair.
Adjustable Handle
Hold the device normally and look carefully at the way the forks of the
adjustable handle are supported on the posts. Each fork should touch the post
close to its center. If they do not, return the device to your supplier or
SAEHAN
for inspection and repair.
Annual Calibration and Repair
It is recommended that this device be checked for accurate calibration annually.
If the device has been dropped or there is reason the suspect that calibration is
required, the device should be serviced immediately. Contact your supplier or
call
SAEHAN
at
+82-55-294-0381
, 24-hour phone support at
+82-10-5282-
0161
, or send email to [email protected]. Additional product and service
information can be obtained at www.saehanmedical.com.
One-Year Limited Warranty
SAEHAN
warrants the DHD-1 to be free from defects in workmanship and
materials for one year from the date of purchase. If this device is found to be
defective during the one-year warranty period,
SAEHAN
at its discretion will
repair or replace the DHD-1. Thereafter, if the DHD-1 is not working properly,
there will be a service charge for repair.
This One-Year Limited Warranty does not cover damage due to dropping
this precision device. Please use the wrist strap to avoid accidental damage.
