39
Problems - Causes - Remedies
Problems
Causes
Remedies
The machine does not turn on
The coffee cycle does not start
The red warning light (26) is
flashing:
The coffee cycle does not start
The red warning light (26) goes
on:
The coffee is not hot enough
No hot water or steam is
dispensed
No coffee is dispensed
Coffee drips out slowly
The machine not getting power
The service door is open
Brew group not positioned
properly or not locked in place
Drip tray not positioned
properly
Dump box not positioned
properly
The coffee container is empty
The water container is empty
The cups are cold
The opening of the steam tube
is clogged
There is no water
Brew group is dirty
Machine not primed
Coffee ground too finely
Machine not primed
Brew group dirty
The blend is not suitable or the
coffee is not freshly roasted or
is ground too finely.
Connect the machine to an
operating electrical outlet
Close the door
Fit or lock the brew group in
place
Fit the drip tray correctly into
place
Fit the dump box correctly into place
Refill the coffee container and
restart the dispensing cycle
Refill the water container, pri-
me the machine and restart the
dispensing cycle
Pre-heat the cups
Clean the opening of the steam
tube with a pin
Refill the water container and
reload the circuit (Par.4.4.)
Clean the unit (Par.11)
Prime the machine (Par.4.4)
Adjust grind setting to a coarser
(higher number) grind.
Prime the machine (Par.4.4)
Clean the brew group (Par.11)
Change the coffee blend or
adjust the grinder as directed
in par.5 (Reduce the dose
Optional)
