Saeco SUP 037DR Manual Download Page 16

• 15 •

English

Orange

Green

•  Turn the selector dial clockwise to the  

” position.

narello when provided) externally. 
In this way, all parts will be perfectly 
cleaned and free of any milk residue.

•  Place a container under the steam/hot 

water wand (Pannarello, if supplied). 

Orange

Green

•  The following icon will be displayed.

•  Fill the cup with hot water to the 

desired level; to stop hot water dis-
pensing, turn selector dial counter-
clockwise back to the  “ ” position. The 
machine returns to the normal operat-
ing mode.

Occasionally, after turning 
the selector dial, hot water 

may not be dispensed and the fol-
lowing icon may be displayed: Simply 
wait until the end of the warm-up 
phase, at which point hot water will 
be dispensed from the wand (Pan-
narello if supplied).

STEAM DISPENSING / 

C APPUCCINO BREW

ING 

Steam may be used to froth milk for a 
cappuccino, as well as to reheat other 
beverages. 

Danger of scalding! Brewing 
may be preceded by small 

spurts of hot water. The steam/
hot water wand may reach high 
temperatures. Never touch it with 
bare hands.

Important Note: After using 
the steam/hot water wand 

to froth milk, immediately clean the 
wand (or Pannarello when provided). 
When the machine is ready, dispense 
a small amount of hot water in a glass 
and clean the steam wand (or Pan-

•  When the machine is ready to brew 

coffee, turn selector dial counter-
clockwise to set it onto the  “

” posi-

tion. Residual water may dispense from 
the steam/hot water wand (Pannarello, 
if supplied).

•  The following icon is displayed during 

the preheating time required by the 
machine.

•  Steam dispensing will begin when the 

following icon is displayed; soon after 
only steam will begin to come out. 

•  Fill 1/3 of the container you wish to use 

to prepare the cappuccino with cold 
milk.

Use cold milk for better 
results when preparing a 

cappuccino.

•  Turn the selector dial clockwise and 

set it back to the “ ” position to stop 
dispensing steam. 

Summary of Contents for SUP 037DR





























Reviews: