25
CHOICE OF COFFEE - HOT WATER JET
•
When the coffee flow has ceased,
remove the filter holder and empty out
the excess coffee grounds.
5.2 Using the brass filter holder
• Place the filter (14 or 15, single or twin
cup, depending on the number of coffees
you wish to make) in the brass filter holder
(13).
•
Fit the filter holder into the coffee
outlet socket (7), pushing it upwards and
turning it to the right until it locks into
place.
•
Place a cup under the filter holder.
• To warm up the filter holder and the cup,
press the coffee switch (4); water will
begin to drip from the filter holder (this
operation is only necessary for the first
cup of coffee).
• When the cup is sufficiently full, press the
coffee switch (4) again.
•
Remove the filter holder from the
machine by turning it to the left.
•
To make one or two cups of coffee,
add 1 or 2 even measures of ground
coffee to the filter, depending on whether
you are using the single or twin cup filter.
• Tamp the coffee down lightly using the
press included with the coffee maker and
brush off any excess coffee from the edge
of the filter holder.
•
Fit the brass filter holder (13) into the
coffee outlet socket (7), as explained
above, pushing it upwards and turning it
to the right until it locks into place.
•
Position two warmed cups under the
filter holder, making sure that they are
directly under the coffee spouts.
• Press the coffee switch. Wait until the cups
are sufficiently filled.
• Press the coffee switch again to stop the
coffee flow.
•
When the coffee flow has ceased,
remove the filter holder and empty out
the excess coffee grounds.
Cleaning hint: when cleaning the filter
take it right out of the filter holder and
rinse thoroughly.
6
ADVICE ON CHOICE OF
COFFEE
Practically any type of ground coffee on the
market can be used with this machine.
Coffee is a natural product and its taste
varies, depending on its origin and blend.
It is therefore advisable to try a number of
different types to discover your own perso-
nal preference.
For best results use blends specifically
ground for espresso machines.
The coffee flow should be constant and
should not drip.
The speed of the coffee flow can be
regulated by changing the dosage, the
fineness of the grinding and/or by how
heavily you tamp down the coffee in the
filter.
BEFORE USING THE HOT
WATER/STEAM JET, MAKE SURE
THAT THE STEAM TUBE (“PANNA-
RELLO”) IS POSITIONED OVER THE
DRIP TRAY.
7
HOT WATER JET
• If the machine is not already on, turn it
on at the main switch (3) which will light
up.
• Wait for the coffee switch, „machine
ready“ light (4) to come on.
•
Place a cup or a glass tea cup under
the steam tube (“Pannarello”).
• Open the “Hot water/steam knob (6),
turning it in anti-clockwise direction
and press the coffee switch (4) to start
Sin013a 165925300 Rev00.p65
12/05/01, 16.39
25
