![background image](http://html.mh-extra.com/html/saeco/saeco-incanto-hd8927-47/saeco-incanto-hd8927-47_user-manual_795490019.webp)
2
Remove the cup with the beverage and place an empty cup under the
milk dispensing spout.
Note: Make sure the milk dispensing spout is pulled out.
3
Press the OK button to start dispensing hot water.
Thorough cleaning of the milk carafe
To clean the milk carafe thoroughly, you have to do the following regularly:
1
Remove the lid of the milk dispensing unit.
2
Lift the milk dispensing spout out of the milk dispensing unit.
3
Remove the milk tube from the milk dispensing spout.
4
Rinse the milk tube and milk dispensing spout with lukewarm water
thoroughly.
Weekly cleaning of the milk carafe
The milk dispensing spout consists of 5 components. Disassemble all
components once a week and clean them under the tap. You can also clean
all components, except for the milk container, in the dishwasher.
1
2
5
3
4
1 Milk tube
2 Rubber support
3 Milk frother
4 Milk frother connector
5 Housing of milk dispensing spout
Disassembling the milk dispensing spout
1
2
1
1
Press the release buttons on both sides of the top of the milk dispensing
unit (1) and lift the top off the milk container (2).
18
English
Summary of Contents for Saeco INCANTO HD8927/47
