background image

Before installing the water tank in the 
machine, make sure the coffee bean 
container cover is properly fitted.

 

Furthermore, should the pump be defective, the 
display shows: 

 
        
        

                  Do not fill the tank with an excessive   
                  quantity of water. 

 
Always fill the tank with fresh water 
only: hot water as well as other fluids 
might damage the tank. Never use   

 carbon dioxide added water. 

 

Programming the machine  

 

 

32 

 

To enter the programming mode, press the 

key

 ENT

 (          pre-ground coffee) when the ma-

chine is on and keep it pressed until the first two 

lines of the programming mode are displayed: 

 

Do not switch on the machine on if 
the water tank is empty: always make 
sure there is enough water in the 
tank! 

Connect the  plug to the socket and press the main 
switch. The following message will be displayed: 

 

Should 
be displayed, press button      "Standby" to 
disactivate the energy saving mode. 

Drainage

 

Direct the steam/hot water spout on the drip tray 
(2). Place a cup or another suitable container 
under the dispensing tube, then turn the steam/ 
hot water knob counterclockwise. The pump starts 
automatically. Wait until a regular water ' jet is 
obtained, then close the knob. The machine is 
now drained and ready to work. The following 
message will be displayed: 

 
 
Important: It is advisable to drain the machine 
before the first start, after a prolonged period 
the machine has not been used or whenever 
the water tank has been completely emptied. 

 
 
 
At the end of the line a blinking asterisk is 
displayed, which can be moved up and down with 
the keys               (tall and regular coffee). 

If the asterisk is on the first menu, press 

 

button to move it on the second menu and  vice 
versa. The display shows the following sequence 
of messages : 

1  LANGUAGE                          10 PROG. H, WATER

 

2 SYSTEM 2                             11 PROG. CAPPUC.

 

3 WATER HARDN.                   12 TOTAL COFFEE

 

4 CUP HEATER                        13 DESCALING

 

5 TEMP. W. COFFEE               14 SIGN. DESCAL.

 

6 TEMP, COFFEE                    15 TIMER

 

7 TEMP. S. COFFEE                16 VENDING

 

8  PREBREWING                      17 EXIT

 

9  PREGRINDING

 

To leave the menu, move the asterisk at the end 
of the line to item « Exit» using 
the key            

.

 Then, press

 ENT

 (            pre-

ground 

coffee). The machine is now in the normal mode 
again. 

Selecting single menus

 

Select the different menu items by means of the 
keys             . The key ENT allows you to 

activate the selected item. It is possible to modify 

 

 

74

                                                                                               DRAINAGE 

VENTILATE 

 

31

 

    Install the water tank, slightly pressing over it 

to fit the valve which will open automatically. 

 

LANGUAGE 

SYSTEM 2 

 

WARMING UP 

ENERGY 

SAVING 

SELECT PRODUCT  

READY FOR USE 

Summary of Contents for Royal Cappuccino SUP 016



























Reviews: