Saeco PicoBaristo HD8927/06, Manual

Page: 41 / 84

The machine grinds the
coffee beans, but coffee
does not come out.
The grind is set too fine. Adjust the grinder to a coarser
setting.
The brew group is dirty. Clean the brew group.
The coffee dispensing spout is dirty. Clean the coffee dispensing spout
and its holes with a pipe cleaner.
The coffee exit duct is blocked. Clean the coffee exit duct with the
handle of the multifunctional tool
or a spoon handle.
The coffee comes out
slowly.
The grind is ground too finely. Adjust the grinder to a coarser
setting.
The brew group is dirty. Clean the brew group.
The coffee exit duct is blocked. Clean the coffee exit duct with the
handle of the multifunctional tool
or a spoon handle.
The machine circuit is blocked by
limescale.
Descale the machine.
The milk does not froth. The milk carafe is dirty or not
inserted correctly.
Clean the carafe and make sure
that you position and insert it
correctly.
The milk froth dispensing spout has
not been opened fully.
Check that the milk froth
dispensing spout has been set in
the correct position.
The milk carafe is incompletely
assembled.
Check that all the components
have been assembled correctly.
The type of milk used is not suitable
for frothing.
Different types of milk result in
different amounts of froth and
different froth qualities. We have
tested the following milk types
which proved to deliver a good
milk froth result: semi-skimmed or
full-fac cow's milk, soy milk and
lactose-free milk. Other types of
milk have not been tested and
may result in a small amount of
milk froth.
The AquaClean filter
cannot be activated as the
tick does not appear on
the display.
A filter has just been activated. You have to dispense at least 10
cups (of 100ml each before you
can activate a new filter. Be careful
as you activate a new filter, the
filter counter will increase
automatically.
The filter cannot be
activated and the
machine asks for
descaling.
You have already replaced 8
AquaClean filters. After 8 filter
replacements you need to descale
the machine.
Descale your machine first and
install the filter.
The filter has not been replaced in
time after the AquaClean water filter
signal started flashing.
Descale your machine first and
install the filter.
41
English