Saeco PicoBaristo Deluxe, User Manual, Page: 10 / 24

2. Activating the AquaClean filter after replacement
Replace the AquaClean filter when the screen shows the message 'Replace AquaClean filter?' or after
3 months of use. Then follow the instructions on the screen to activate the filter properly.
3. Activating the AquaClean filter at any other time
You can start using the AquaClean filter at any time by following the instructions below.
1 Tap the Settings icon and use the up and down icons to select 'AquaClean' (Fig. 5).
2 Tap the OK icon. When the activation screen appears, tap the OK icon again.
3
Follow the instructions on the screen.
Note: In some situations the machine will tell you that you need to descale the machine before you
can install and activate a new AquaClean filter. This is because your machine has to be completely
limescale-free before you start to use the AquaClean filter. Follow the instructions on the screen.
Measuring water hardness
During first installation, you have to set the water hardness. Follow the steps on the screen and use
the water hardness test strip supplied. To set the water hardness later, tap the Settings icon and
select 'water hardness'.
1
Immerse the water hardness test strip in tap water for 1 second. Then wait for 1 minute.
2 Check how many squares have turned red.
3 Select the appropriate water hardness setting and tap the OK icon to confirm.
Number of red squares:
Value to be set 1 2 3 4
Using the control panel
Below you find an overview and description of the control panel of the machine. Use the up and down
arrows to scroll through the display and tap the OK icon to select or confirm your choices.
Profiles
Clean Settings
7 More drinks
Espresso Coffee Cappuccino Latte Macchiato Café au lait Hot Water Americano
1 4 3
5 7 8 9 6
2
1. On/off button 4. Start/stop button 7. Machine settings
2. One-touch drink icons 5. Navigation icons (up,
down, back, ok) 8. Cleaning menu
3. Menu with 7 more drinks 6. Display 9. Personal profiles
8
English