English
5
57
5.3
Connection to water mains
Before connecting the appliance to water network,
please read and follow the applicable regulations in
force in your country.
Make sure the water network provides drinkable
water, with pressure ranging between 0,15MPA -
=,8MPA (1,5 and 8 bars).
Water hardness should not be less than 8°F.
Use the metal clamp to connect the drain tube to the drip
tray.
Insert the drip tray into the machine front.
We recommend that the machine be supplied with
water treated by a descaling device, particularly for
water with high content of calcium and magnesium
(hard water).
Connect the water filter (C) to the water network (D).
Before connecting the water softener to the machine,
wash the machine until the water is clear.
C
Water Filter
D
Water network
E
Drain channel
Connect the machine to the drinking water network by
means of the coupling (F). Only a tube and couplings
suitable "for food" must be used for the connection.
F
Water inlet coupling
Insert the filling tube and the drain tube into the hole A.
Connect the drain tubes to the drain pipe (E).
Should the machine be moved to a different place, the
fitting unit must be replaced with a new one (water
network connecting pipe).
The water mains pipe should be certified according to
the standard IEC 61770.
