Brew group:
How to remove:
1.
Turn OFF the machine.
2.
Open the service door.
3.
Remove the coffee ground drawer.
4.
Remove the coffee ground container.
5.
Press the PUSH button and pull the brew group out.
How to insert, set in rest position:
Important!
If the brew group does not stand in the rest position, it cannot be reinserted.
How to set the brew group in the rest position
1.
The lever must be in contact with the brew group base. Push it down.
2.
The two arrow heads on the side of the brew group will now match.
3.
The locking hook on the side of the brew group needs to be in uppermost position. Push it
upwards until you hear a soft click.
Display messages during descaling:
Start
process
Add the
descaling
solution.
The machine is in
the descaling
cycle. It
dispenses at
intervals.
The descaling
cycle is finished.
Rinse and fill the
water tank with
fresh water.
The machine
is ready to
start rinsing
cycle
During descaling cycle: During rinsing cycle:
Start descaling:
Refill the
tank and
repeat
rinsing cycle.
The rinsing
cycle is
completed
and you can
exit
The machine
warms up
and performs
an automatic
rinse cycle.
•
The complete process consists of 3 cycles; One
descaling cycle
with the specific Saeco decalcifier CA6700 and two
rinsing cycles
with fresh water.
•
Before starting the descaling process: Remove the automatic milk frother, empty the drip tray and remove any extra placed water filter (example. ) from the water
tank.
Compact description descaling process:
Start descaling:
1.
Press the “Menu" button until the CACL CLEAN symbol appears.
2.
Press the “Espresso ” button to start the descaling . The descaler symbol appears on the display.
Descaling cycle:
3.
Take out the water tank. Pour the entire bottle of Saeco descaling solution in the water tank.
4.
Top up the water tank with fresh tap water to the Calc Clean line. Place the water tank back into the machine.
5.
Place a bowl underneath the steam/hot water wand and the dispensing spout.
6.
Press the “Espresso” button to start the descaling cycle. The machine will start dispensing the descaling solution at intervals. The bar on the display shows the progress. This
takes about 25 minutes.
Note:
The descaling cycle can be paused by pressing the “Espresso” button .To resume the cycle, press the “Espresso” button again.
7.
When the mixture of descaling solution and water has been used up, the ‘water tank empty’ symbol appears on the display.
Rinsing cycles:
8.
Clean the water tank thoroughly, fill it with fresh water to the
MAX
and place it back. The ‘start rinsing’ symbol appears on the display.
9.
Place back the bowl. Press the “Espresso ” button and the machine starts the
first rinsing
cycle.
10. When the ‘water tank empty’ symbol appears on the display, repeat steps 8-9 to start the
second rinsing
cycle.
11. When it is finished the ”Calc Clean ready” symbol appears to indicate that the descaling process has been completed. Exit the descaling process.
Important note:
If the ‘water tank empty’ symbol appears on the display instead of the ‘Calc Clean ready’ symbol, you did not fill the water tank up to MAX level. Refill
the water tank up to MAX level and perform another rinsing cycle. Repeat steps 8-9 until the ‘Calc Clean ready’ symbol appears. You may have to do this several times
before the ‘Calc Clean ready’ symbol appears.
12. If the machines shows the prime circuit symbol, first start priming the circuit before brewing any coffee.
Remove Bean container
and detach:
To remove
push
the selector to the unlock position
Lift the container with both hands.
To detach
the two parts of the
coffee bean container, turn it and
push down the small hooks in the
bottom.
Automatic milk
frother:
Insert the
Automatic Milk Frother in
the steam wand seat.
Make sure that it is
positioned correctly. If you
cannot insert it, rotate the
chrome cover.
