Saeco Minuto HD8762 User Manual Download Page 68

Page: 68 / 76

ENGLISH

Machine actions

Causes

Solutions

The machine grinds coff ee
beans but no coff ee comes
out (see note)*.

The brew group is dirty.

Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).

This might occur when the ma-
chine is automatically adjusting
the dose.

Brew a few cups of coff ee as
described in the “Saeco Adapting
System” chapter.

The coff ee dispensing spout is
dirty.

Clean the coff ee dispensing spout.

Coff ee is too weak (see
note)*.

This might occur when the ma-
chine is automatically adjusting
the dose.

Brew a few cups of coff ee as
described in the “Saeco Adapting
System” chapter.

The ceramic coff ee grinder is set
to a coarse grind.

Adjust the ceramic coff ee grinder
to a fi ner setting (see the “Adjust-
ing the Ceramic Coff ee Grinder”
chapter).

Coff ee is brewed slowly (see
note)*.

The coff ee grind is too fi ne.

Change coff ee blend or adjust
grinding as explained in the “Adjust-
ing the Ceramic Coff ee Grinder”
chapter.

The circuit is not primed.

Prime the circuit (see the "Using the
Machine for the First Time" chapter).

The brew group is dirty.

Clean the brew group (see the
"Weekly Cleaning of the Brew
Group" chapter).

Coff ee leaks out of the coff ee
dispensing spout.

The coff ee dispensing spout is
clogged.

Clean the coff ee dispensing spout
and its holes.

Milk does not froth.

The Automatic Milk Frother is in-
serted too deep. No milk is being
suctioned.

Leave the Automatic Milk Frother to
cool down. Move it slightly down-
wards. Reposition it in its correct
seat.

Frothed milk is too cold.

The cups are cold.

Preheat the cups with hot water.

The machine is in demo mode.

The

“

”

button was pressed and

held for more than 8 seconds.

Disconnect the power cord and turn
the machine back on.

Note:

(*)These problems can be considered normal if the coff ee blend has been
changed or if the machine has just been installed. In this case, wait until
the machine performs a self-adjusting operation as described in the "Saeco
Adapting System" chapter.

Summary of Contents for Minuto HD8762













































































Search results

Summary of Contents for Minuto HD8762

Reviews:

Related manuals for Minuto HD8762

Brands by name

Popular brands

Saeco Minuto HD8762, User Manual

Search results

Summary of Contents for Minuto HD8762

Reviews:

Related manuals for Minuto HD8762

Brands by name

Popular brands