DESCALING START
DESCALING START
37
38
a ground coffee portion is always ready in the
doser. This allows time saving in the semi-
professional domain.
Move the asterisk to the menu item PRE-
GRINDING using the keys
and press
MENU'
to activate it.
The display shows:
"PREGRINDING "
"OFF "
The keysallow you to change the set options: on,
off.
Hot water programming
Whenever this function is enabled, the
selected water amount is constantly
dispensed. On the contrary, whenever this
function is disabled hot water is dispensed
until the user stops the dispensing.
Hot
water amount can only be
programmed with programming
mode enabled.
- “
PROG. H. WATER
”. Press
MENU'
to
activate this function.
The following message will be displayed:
"PROG. HOT WATER "
"ON "
The keys
allow you to change the set
options:
ON
,
OFF
.
Total coffees
Move the asterisk to the menu item TOTAL
COFFEES using the keys
and press
MENU'
to activate it.
The display shows:
"TOTAL COFFEES "
and the number of coffees that the machine has
dispensed.
This value cannot be modified. Press
MENU'
to
exit.
Descaling
Move the asterisk to the menu item DESCALING
using the keys
and press
MENU
to
activate it.
The display shows:
"DESCALING "
On descaling see page 45.
Sign. Descaling
The display shows the quantity of water, in litres,
needed to get to the descaling value programmed
by the machine according to the set water
hardness.
Move the asterisk to the menu item “Descaling”
using the keys
and press
MENU'
to
activate it.
The display shows:
"QUANTITY WATER "
"NOT REACHED "
alternated to
"LEFT QUANTITY "
"LITRE XXX"
Water hardness adjustment
In order to adjust the water hardness, it is
necessary to test the water using the strip supplied
with the machine. Dip the strip into the water for
a second, shake off excess water gently, wait
approx. 1 minute and read the results.
Move the asterisk to the menu item WATER
HARDNESS using the keys
and press
MENU'
to activate it.
The display shows:
"WATER HARDN "
"HARDNESS 1 "
The key sallow you to
change the set options:
hardness 1 (very soft),
hardness 2 (soft),
hardness 3 (medium),
hardness 4 (hard).
Activating the cup heater
Move the asterisk to the menu item CUP HEATING
PLATE using the keys
and press
MENU'
to activate it.
The display shows:
"CUP HEATER "
"ON "
The keysallow you to change the set options: on,
off.
Selecting temperature
Move the asterisk at the end of the line to the
menu items “
Temp. l. coffee
”, “
Temp.
coffee
” or “
Temp. S. coffee
” and
select it by means of the
MENU'
key.
Depending on the selection, the following
messages will be displayed:
"TEMP. L. COFFEE "
"MEDIUM "
"TEMP. COFFEE "
"MEDIUM "
"TEMP. S. COFFEE "
The keys
allow you to change the set
options “
Minimum
”, “
low
”, “
medium
”,
“
high
” or “
maximum
”.
Selecting the prebrewing
function
As soon as the coffee has been moistened, the
pump stops for a while. Then, the brewing cycle
continues.
Move the asterisk to the menu item PRE-BREWING
using the keys
and press
MENU'
to
activate it.
The display shows:
"PREBREWING "
"ON "
The keysallow you to change the set options: on,
off, long (in this case the pump stops for a longer
period).
Selecting the pregrinding
function
By selecting the pre-grinding function, the machine
grinds coffee every time the doser is empty. So,
Hardness 4
Hardness 3
Hardness 2
Hardness 1
0339.951 ed. 01 10/00 ING (UL)
11-12-2000, 18:06
5
