Saeco Intelia Deluxe HD8906/06, Manual

Page: 11 / 56

16
Remove the water tank from the machine, empty it and insert the filter
vertically onto the filter connection.
17
Fill the water tank with fresh water to the MAX level indication.
18
Press the OK button.
AQUA
CLEAN
0/8
ON
OFF
19
Select ON on the display and confirm the activation by pressing the OK
button
When activation is finished, the display shows a tick to confirm activation.
AQUA
CLEAN
100%
20 The display shows the filter ready icon to indicate the AquaClean filter
has been installed correctly.
21 To rinse the filter, press the SPECIAL DRINKS button and select the HOT
WATER option and press the OK button twice. Water flows out from the
hot water dispensing spout. Discard this water.
It can take a while until water comes out of the hot water dispensing
spout. The filter needs to be fully filled and rinsed with water.
The machine is ready for use.
After installing the AquaClean filter, you do not have to perform the manual
rinsing cycle.
Manual rinsing cycle
1
Place a container under the coffee dispensing spout.
2 Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
Do not add pre-ground coffee in the pre-ground coffee compartment.
3 Press the ESPRESSO or ESPRESSO LUNGO button.
-
The machine starts dispensing hot water.
4
Wait until the machine stops dispensing water and empty the container.
5
Repeat steps 1-3 twice.
6
Press the SPECIAL DRINKS button. Place a container under the hot water
dispensing spout.
7 Press the UP/DOWN buttons to scroll through the options of the display.
Press the OK button to select ‘hot water’.
8 Press the OK button to start hot water dispensing.
10
English