ENGLISH
27
Flashing
Steadily lit
CONTROL PANEL MESSAGES
Flashing
Flashing
Fill the coffee bean container with coffee
beans and start the coffee brewing cycle.
Fill in the water tank with fresh, drinking
water; prime the circuit by turning the hot
water/steam knob counterclockwise. When
the warning light turns off, close the knob by turning it clockwise.
Load the circuit. When the warning light turns off, close the knob by turning it
clockwise.
Empty the dregs drawer.
Important note: the dregs drawer may be emptied only when the machine
is on. The drawer must be removed for at least 5 seconds. If you empty the
drawer with the machine off, you will not be able to dispense coffee the next
time you switch the machine on.
Fit the brew group properly in place.
Fit the drip tray and dregs drawer properly
in place.
Close the front door.
Replace the water fi lter in the tank.
After replacing the fi lter in the tank, reset the
alarm by pressing the button for 5 seconds
until the light goes off.
The control panel display guides users and helps them to use the machine correctly.
The machine is in warming phase for
brewing coffee and dispensing hot water
and/or steam.
The machine is ready to brew coffee and di-
spense hot water and/or steam.
The machine is brewing one coffee.
The machine is brewing two coffees at the
same time.
The machine can dispense hot water.
The machine can release steam.
On
Off
On
On
Steadily lit
Summary of Contents for Incanto Rondo Plus
Page 102: ...OPMERKING 102 ...
Page 103: ...OPMERKING 103 ...
