Saeco Incanto Digital, Manual

Page: 26 / 72

4
Pull the milk frother connection out of the milk frother.
5
Rinse all components under a lukewarm tap.
Tip: All detachable parts, except the carafe, can be cleaned in the
dishwasher.
Reassembling the milk carafe
1 To reassemble the milk froth dispensing spout, follow steps 2 to 4 of
'Disassembling the milk froth dispensing spout' in reverse order.
2
Place the milk froth dispensing spout back in the top of the milk carafe.
3 Place the top of the milk carafe back on the milk carafe.
Note: Before you place the milk froth dispensing spout back in the top of
the milk carafe, move the pin inside the top to the correct position. If this
pin is not in the correct position, you cannot place the milk froth
dispensing spout back in the top of the milk carafe.
Monthly cleaning of the milk carafe
Only use SAECO milk circuit cleaner CA6705 for this cleaning cycle.
1 Pour the contents of the milk circuit cleaner sachet in the milk carafe.
Then fill the milk carafe with water up to the MAX level indication.
2 Insert the milk carafe into the machine and place a container under the
milk froth dispensing spout.
3
Press the MENU button, select ' Drinks' and scroll to milk froth. Press the
OK button to start dispensing the cleaning solution.
4
Repeat step 3 until the milk carafe is empty.
5
When the carafe is empty, remove the container and the milk carafe from
the machine.
6 Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX
level indication.
7 Insert the milk carafe into the machine.
8 Place the container under the milk froth dispensing spout.
9 Press the MENU button and select milk froth in the special drinks menu
to start the carafe rinsing cycle.
10 Repeat step 9 until the milk carafe is empty.
Note: Never drink the solution dispensed during this step
11 Repeat step 6-10.
12 When the machine stops dispensing water, the cycle is finished.
13 Disassemble all the components and rinse them under a lukewarm tap.
The machine is ready for use.
Descaling procedure
When the display shows 'start calc clean', you need to descale the machine.
If you do not descale the machine when this message appears on the
display, the machine stop working properly. In that case, repairs are not
covered by the guarantee.
Only use Saeco descaling solution to descale the machine. Saeco descaling
solution is designed to ensure optimal performance of the machine. The use
26
English