The coffee comes out
slowly.
The grind is ground too finely.
Change the grinder to a coarser
setting.
The brew group is dirty.
Clean the brew group.
The coffee exit duct is blocked.
Clean the coffee exit duct with the
handle of the multifunctional tool or a
spoon handle.
The machine circuit is blocked by
limescale.
Descale the machine.
The milk does not froth.
The automatic milk frother is
dirty or not assembled or
installed correctly.
Clean the automatic milk frother and
make sure it is correctly assembled or
installed.
The type of milk used is not
suitable for frothing.
Different types of milk result in
different amounts of froth and
different froth qualities. Semi-skimmed
or full-fat cow's milk give good results.
You did not replace the filter
when the filter symbol started
flashing.
The filter does not fit.
You need to remove air from the
filter.
Let air bubbles come out of the filter.
There is still water in the water
tank.
Empty the water tank before you
install the filter.
There is water under the
machine.
The drip tray is too full and
overflowed.
Empty the drip tray when the drip tray
full indicator pops up through the drip
tray. Always empty the drip tray before
you start descaling the machine.
The machine is not placed on a
horizontal surface.
Place the machine on a horizontal
surface so that the drip tray full
indicator works properly.
Note: If you are unable to solve the problem with the information in this
table, contact the Philips/Saeco hotline.
22
English
