30
ENGLISH
3
Remove the “” water fi lter from the water tank if it was instal-
led.
4
Remove the water tank and pour the entire content of the Saeco decal-
cifi er. Then fi ll the water tank with fresh water up to the MAX level.
5
Place the water tank back into the machine.
6
Place a large container (1,5 lt) under both the steam/hot water wand
and the dispensing spout.
7
Press and hold the “
” for 3 seconds. When the button starts
fl ashing, release it to start the cycle. The “
” button fl ashes during
the whole descaling cycle.
Note:
If you press the “
” button by mistake, press the “
” button to quit.
8
The machine starts dispensing the descaling solution through the
steam/hot water wand (the “
” button fl ashes) and the dispensing
spout (the “
” button fl ashes).
Note:
The descaling cycle may be paused by pressing the “
” button. To
resume the cycle, press the “
” button again. This allows you to empty
the container or to stay away from the machine for a brief period of time.
9
When the descaling solution is fi nished, the “
” light turns on and the
“
” button fl ashes.
