Saeco EXPRELIA HD8854, Operating Instructions Manual

Page: 36 / 52

31
CARAFE CLEANING
DESCALING
CARAFE CLEAN
MAINTENANCE
1
OK ESC
START DESCALING?
2
Select the menu option.
Press the "OK" button to confi rm.
Refi ll water tank with descaling solution.
Press the "OK" button to confi rm. Warning: Once this selection is made, the
whole cycle will have to be completed.
Press the "OK" button to confi rm or "ESC"
to exit
BOILER DESCALING CYCLE MENU
Descaling should be performed every 1-2 months or when the machine displays the relevant message. The machine must be on to perform
this cycle; it automatically controls the distribution of the descaling solution.
In case of confl ict, priority must be given to what is indicated in the operation and maintenance manual over the
instructions provided on separately sold accessories and materials.
DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.
WARNING! NEVER USE VINEGAR AS A DESCALING SOLUTION.
Only use the Saeco descaling solution, especially designed to respect the technical features of the machine, to ensure its performance
will not decrease with time, and for a safe and risk-free use. The descaling solution is to be disposed of according to the manufacturer’s
instructions and/or regulations in force in the country of use.
Note: Before starting a descaling cycle make sure that:
1. THE INTENZA WATER FILTER HAS BEEN REMOVED
2. A container of adequate size or a couple of containers are available and are placed in the points identifi ed
DESCALING AND/OR RINSE CYCLES CANNOT BE STOPPED; ALL THE PHASES MUST BE COMPLETED. IF THE MACHINE IS
SWITCHED OFF OR IN CASE OF POWER FAILURES, THE INTERRUPTED CYCLE MUST BE REPEATED FROM THE BEGINNING.
HOWEVER, CYCLES MAY BE PAUSED BY PRESSING THE "PAUSE" BUTTON; IT WILL BE POSSIBLE TO RESUME THE CYCLE AT
ANY TIME BY PRESSING THE "START" BUTTON.
TURN THE SBS DIAL ALL THE WAY TO THE LEFT, COUNTER-CLOCKWISE (SEE PAGE 8), BEFORE STARTING THE CYCLE.
To correctly prepare the descaling solution, pour the entire content of the Saeco concentrated descaling solution into the water tank, and
then fi ll the tank with fresh water up to the MAX level.
Note: During the descaling cycle, some alarm messages may appear to allow for a correct management of the machine.
After resetting the message, always press the "START" button to resume the descaling cycle.
OK
FILL TANK WITH
DESCALING SOLUTION
3
Downloaded from CoffeeMachineManual.com Manuals