Saeco Aulika SUP040R, Operating Instructions Manual

Page: 19 / 62

• 13 •
Machine Use - User Manual
2 When the machine is ready, press the " " button (21) to
start dispensing the latte macchiato.
3 The machine prepares the latte macchiato automatically.
4
After using the Cappuccinatore, clean it as described in sec-
tion 5.4.
Remove the container and clean it if necessary.
3.10 Dispensing Hot Water
Dispensing may be preceded by short spurts of hot
water. Risk of burning. The hot water wand may
reach high temperatures.
1 Place a container under the hot water wand (Fig.07,
page 3) .
2 Press the " " button (22) to start dispensing hot water
through the wand.
HOT WATER
ESC
STOP HOT WATER
3 After dispensing, remove the container with hot water.
Note: You can stop the brewing process by press-
ing the "
" button (23).
3.11 "SPECIAL" Products
The machine is designed to also brew products other than those
displayed on the control panel.
Note: After pressing the " " button (23), if no
product is selected, the machine goes back to the
main menu after 10 seconds.
1 Press the " " button (23) to access the menu.
SPECIAL BEVERAGES
LONG COFFEE
HOT MILK
AMERICAN COFFEE
STEAM
Note: The "STEAM" function is displayed and can be
selected only if it has been previously activated by
the service provider; otherwise, it is not available.
2 The display shows the page for "special" beverages.
Note: This menu enables only a single brewing
process at a time. To brew more products repeat
the described procedures.
3
Select the desired beverage by pressing the " " (20) or
" " (24) button.
4 When the desired beverage has been selected, press the
" " button (18) to start the preparation.
Refer to the section relevant to the brewing of the
desired beverage.
For the preparation of milk-based beverages,
install the Cappuccinatore after washing it as de-
scribed in section 5.4.
Long Coff ee
This programme allows you to prepare a long coff ee.
1 Press the " " button (23) to enter the menu.
SPECIAL BEVERAGES
LONG COFFEE
HOT MILK
AMERICAN COFFEE
STEAM
2 Place a suitable cup under the dispensing spout (Fig.05,
page 3) .
3
Press the " " button (18) to start the preparation.
4 After brewing, remove the coff ee cup.
Note: You can stop the brewing process by press-
ing the "
" button (23).