Saeco 740823349, Operating Instructions Manual

Page: 39 / 172

1 2 3 4 1 2 3 4
ENGLISH
PROGRAMMING MACHINE FUNCTIONS
Select the MENU.
This function must be activated when the “Aqua
Prima” cartridge fi lter is installed for the fi rst time.
The “RESET” command must be activated every
time a new cartridge fi lter is installed.
From the menu it is
possible to set the
function to ON.
When the function ap-
pears, select it using
the “OK” button.
This function enables optimal management of the
“Aqua Prima” fi lter as it warns the user when the
fi lter needs replacing.
Press the “OK” button to
confi rm your choice.
SETTINGS
SETTINGS
LANGUAGE
WATER HARDNESS
WATER FILTER
ON
OFF
RESET
WATER FILTER
ON
OFF
RESET
WATER FILTER
W
ATER FIL
TER
CONTRAST
Select the MENU. From the menu it is
possible to set the
desired contrast.
When the function ap-
pears, select it using
the “OK” button.
Press the “OK” button to
confi rm your choice.
SETTINGS
SETTINGS
WATER HARDNESS
WATER FILTER
CONTRAST
0
CONTRAST
2
CONTRAST
This function allows the user to adjust the display
contrast according to personal need.
W
AT
ER
H
AR
DN
ES
S
The setting should be adjusted according to the
level of water hardness in the local area.
The hardness of tap water may vary depending on
the region. For this reason, the appliance can be
set according to the water hardness in the place
where it is to be used, expressed on a scale of 1
to 4. The appliance is factory set on a hardness
value of 3.
Dip the strip in water for
1 second.
Check how many squa-
res change colour.
Select the corresponding hardness
(e.g. 2 squares = Hardness 2) and memorize the
value by pressing the “OK” button.
When the function ap-
pears, select it using the
“OK” button.
SETTINGS
RINSING
LANGUAGE
WATER HARDNESS
WATER HARDNESS WATER HARDNESS
39