Saeco 740816308, Operating Instructions Manual

Page: 28 / 100

PROBLEMS CAUSES REMEDIES
The machine does not
turn on.
The machine is not
connected to the power
supply.
Move the main switch to ON.
Check the plug and the
connection
The coffee is not hot
enough.
The cups are cold. Warm up the cups.
Only water is
dispensed when you
select “preground
coffee”.
No preground coffee has
been introduced.
Dispense again after
introducing preground coffee.
No hot water or steam
is dispensed.
The tube nozzle is
clogged.
Clean the nozzle opening
with a needle.
During this ope-
ration, the knob must
be closed and the machine
must be off.
The machine takes a
long time to warm up.
Excessive scale has
built up.
Descale the machine.
The brew unit cannot
be removed.
The unit has stopped in
the wrong position.
Close the door and switch on
the machine; the brew unit
will move back into position.
DISPLAY MESSAGES
The control panel display guides users and helps them to use the machine correctly.
Descale the machine
Fill the water tank with fresh drinking water.
Load the circuit (Starting up)
Fill the coffee bean container with coffee
beans.
Open the door, remove the dregs drawer
and empty the used coffee grinds into a
suitable container.
Important note: the dregs drawer may
be emptied only when the machine is
on. The drawer must be removed for
at least 5 seconds. If you empty the
drawer with the machine off, you will
not be able to dispense coffee the next
time you switch the machine on.
Fit the brew unit, drip tray and dregs drawer
correctly into place.
Close the front door.
Coffee grinder motor jammed.
Brew unit motor jammed.
Contact an Authorised Service Centre.
Flashing
Steadily lit
Flashing
Steadily lit
Flashing
Steadily lit
Flashing
28