7
5
6
7
8
9
1
3
2
4
Insert the
fi
lter in the empty tank.
The reference mark and the
groove must match. Push
fi
rmly
until it is completely inserted.
Select “water
fi
lter” and press
again.
When the machine has
fi
nished, turn the knob until it is in the rest position ( ). Press
a few times until the
“exit” message is displayed. Then press
. The machine is now ready for use.
NOTE: if the Intenza water
fi
lter is not used, insert the small white
fi
lter previously removed (see step 1)
into the tank.
Press
.
Select “maintenance” and press the
button.
Select “activate
fi
lter” and press the
button.
Turn the knob to the
position.
Water dispensing begins..
3 maintenance
3.1 water filter
3.1.3 activate filter
execute now
INTENZA WATER FILTER
To improve the quality of the water you use, and to extend the life of your machine at the same time, it is
recommended that you install the water
fi
lter. After installation, select the water
fi
lter function under the
maintenance menu (see page 20). By setting the water
fi
lter status to ON, the machine informs the user when
the
fi
lter must be replaced.
Remove the water
fi
lter from its packaging, immerse it vertically (with the opening facing upwards) in
cold water and gently press its sides so as to let the air bubbles out.
Remove the small white
fi
lter from
the tank and store it in a dry place
sheltered from dust.
Fill the tank with fresh drinking
water and re-insert it into the
machine.
Set the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
Place a container beneath the hot
water/steam wand.
1.
1.
2.
2.
2.
3.
1.