35
34
. Press
ENT
to activate this item.
The display shows:
"WATER HARDN "
"HARDNESS 2 "
Activating the cup heater
Move the asterisk at the end of the line to the
menu item CUP HEATER. Press
ENT
to activate
this function.
The display shows:
"CUP EATER "
"ON "
The keys
allow you to change the set
options: on, off.
Selecting temperature
Move the asterisk at the end of the line to the
menu item TEMPERATURE using the keys
.
Press
ENT
to activate this item.
The display shows:
"TEMPERATURE "
"MEDIUM "
The keys
allow you to change the set
options: minimum, low, medium, high, maxi-
mum.
Selecting the prebrewing
function
As soon as the coffee has been moistened, the
pump stops for a while. Then, the brewing cycle
continues.
Move the asterisk at the end of the line to the
menu item PREBREWING using the keys
.
Press
ENT
to activate this function.
The display shows:
"PREBREWING "
"ON "
The keys
allow you to change the set
options: on, off, long (in this case the pump
stops for a longer period).
Selecting the pregrinding
function
By selecting the pregrinding function, the ma-
chine grinds coffee every time the doser is
empty. So, a ground coffee portion is always
ready in the doser. This allows time saving in the
semi-professional domain.
Move the asterisk at the end of the line to the
menu item PREGRINDING using the keys
. Press
ENT
to activate this function.
The display shows:
"PREGRINDING "
"OFF "
The keys
allow you to change the set
options: on, off.
Total coffee
Move the asterisk at the end of the line to the
menu item TOTAL COFFEES using the keys
PROGRAMMING THE COFFEE MACHINE
PROGRAMMING THE COFFEE MACHINE
. Press
ENT
to activate the option.
The display shows:
" TOTAL COFFEE"
" 1234"
and the total number of coffees dispensed by
the machine.
This figure cannot be changed.
To leave this menu, press
ENT
or
ESC
.
Descaling
Move the asterisk at the end of the line to the
menu item DESCALING using the keys
.
Press
ENT
to activate the item.
The display shows:
"DESCALING "
On descaling see page 47.
In programming function, by pressing keys,
move the asterisk till the end of the line on the
menu
Sign. Descal.
and confirm the selection
with
ENT
button.
The following message will be displayed:
"RESET DESCALING "
"NO "
By means of the same keys, it is possible to
modify the value; Yes, or no.
If the function
"SIGN. DESCAL. "
is selected without the display message Descale,
the following message will be displayed:
"QUANTITY WATER "
"NOT REACHED "
To enter the programming mode, press the Key
ENT
.
Timer
The timer enables the automatic switching off of
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing.
If after a few seconds coffee is brewed again,
the timer is reset. If the value set is 0:00, the
timer function is not activated and the machine
does not switch off.
Move the asterisk at the end of the line to the
menu item TIMER by means of the keys
.
Press
ENT
to activate this item.
The display shows:
"STANDBY "
"AFTER 0:00"
The keys
allow you to set the time peri-
ods. Save by means of the
ENT
key.
If the set time has already passed, the display
shows:
"ENERGY "
"SAVING "
and the machine switches off. If necessary, you
can switch on the machine again by means of
the energy saving switch.
Rinsing cycle
This appliance is equipped with a rinsing
cycle program for the usual, daily and
weekly rinsing. If regularly used, this pro-
gram effectively eliminates the greasiness of
coffee in inaccessible parts and avoids
alterations in the taste of coffee.
Depending on the way the appliance is
used, it is advisable to rinse it every month
or after max. 250 cups of coffee. The
rinsing cycle lasts about 5 minutes, and it is
divided into 4 cycles, including the rinsing
40
39
Hardness 4
Hardness 3
Hardness 2
Hardness 1
The keys
allow
you to change the set
options:hardness 1 (very
soft), hardness 2 (soft),
hardness 3 (medium),
hardness 4 (hard).
Man. Titan 0313.959 ING (UL)
12-12-2000, 16:09
5
