Instructions for Use:
1. The Electrode Wires provided
with the
Saebo
Stim Pro
connect to the Output Ports
(OUT A / OUT B) located at
the top of the Stimulator.
The wire connectors were
designed so they will insert
and connect firmly into place.
Since only one Electrode Wire
is needed, it is recommended
that you plug it into Outlet A.
See Figure 1.
2. Connect the
Saebo
Stim
Pro Electrode Wire to the
Garment Snap Connectors by
inserting the pin ends into
the Connector. See Figure 2.
Figure 1
Figure 2
Figure 3
Figure 4
3. With the Garments on a flat surface, attach the Garment Snap
Connectors to the Glove and Arm Sleeve by pressing it firmly
until you hear an audible click. See Figures 3 and 4.