SAE TXQ Series, User Manual

Page: 15 / 24

13/20
Front panel functions
Front Panel
Handel
Mounting hole
Control panel
Cleaning guide of the dust filter
The first time cleaning of the strainer mesh
should be right after installation.
Recommend to clean the strainer mesh
quarterly.
Please do not run the product without the
dust filter, or it makes the service
life of the product shorten.
Such
no warranty. condition will be considered as
Suction/
Dust filtering sponge
Illuminates when compressor / limiter is
protecting the amplifier from input overload.
CLIP
Illuminates when either protection
circuit action.
PROT
Illuminates when output signal around -5dB
than full power.
-5dB
Illuminates when output signal around -10dB
than full power.
-10dB
Illuminates when output signal around -20dB
than full power.
-20dB
The signal light
SIG
Ch1-CH2-CH3-CH4
Gain Controller Knob
300°volume knob from 0 to -80dB.
Stereo/Paralle Mode: volumes of Ch1 and CH2
control independently.
Bridge Mode: Such as CH1 knob controls both volumes.
CH1 stops working.
For normal operation, please keep the
controller at max (0 dB).
ON
Illuminates when the amplifier start.
Power switch
TX Series Power Amplifier