SADiE LRX2, User Manual

Page: 8 / 11

8
Phantom Power is enabled on Microphone inputs by pressing the small “ lightning ” icon in the left side of the
EDL stream.
Input Select Inputs are automatically configured based on the input slithers in the system, thus if you had for
instance a Mic card in Slot 1 and an AES card in slot 2 then inputs 1-16 would be Mic/Line, and 17-32 would be
AES.
The
Six Function keys (above the wheel) offer :
Set sets a locator
Prev / Next locates to the Previous or Next locator
Record All Record Enables all Selected Streams
Shift applies an alternative function when used in conjunction with other buttons.
Mode switches the first four buttons so that they become programmable function keys. In
the software these would be HWC F1 to HWC F4 respectively and are set in the usual Hotkey
section of the Setup page. Thus when the LED on Mode is lit, the other keys are user keys.
Timecode – set the LRX to be either timecode Master or Slave. Go to the Setup Window / Sync, choose
Timecode type - LTC; Sync Mode – Master (to generate) or Slave. Then enable LTC generation or Slave by
pressing the ONLINE button at the bottom of the screen (or SHIFT-SET on the panel).