5
STEP 1: PUT THE BACK REST AND SEAT
TOGETHER
•
Remove the bolts that are pre
mounted on the backrest before
doing the first step.
•
Two bolts are located on each side
of the backrest.
•
Put the backrest and seat together
as seen on Fig.1.
•
Pay attention to the red marked
section which needs aim for the
bolt holes
STEP 2: LOCK THE BACK REST AND SEAT
•
Lock the 4 bolts on the left and the
right side as seen on Fig.2.
(Begin in the right side where the tilting
handle is located. Screw both bolts on the
right side half way in and then screw in
the two bolts on the left side. Once the
bolts are screwed securely, tighten the
bolts on both sides.)
4 Hexagonal Socket
Bolts (pre-mounted)
2 small bolts and 2
screw covers
4 Hexagonal Socket
Bolts (pre-mounted)
Headrest (pre-mounted)
Cushion (pre-mounted)
