•
The main cargo compartment flap opens fully with solid tethered sides for easy loading
•
Internal mesh storage compartments secures cargo while keeping it visible
•
Adjustable mounting sleeve adapts to the shape and width of your bike’s Sissybar
•
Fully adjustable, high strength nylon webbing hold-down straps are supplied – you can mount
the bag easily even if you don’t have a rear rack.
•
Multiple mounting rings around the bag overcome unique mounting challenges
•
Can be used with Saddlemen’s Versa Mount System (#3550-0117) to mount directly to a seat;
does not require a Sissybar or backrest
•
Rigid luggage shell maintains its shape regardless of cargo load, yet is lightweight to reduce the
impact on your motorcycle.
•
Marine-spec materials and stitching holds up the elements to give you decades of sound use
•
Strong, nylon meshing zipper teeth with chrome sliders equipped with large pulls for easy use
with a gloved hand
•
High visibility yellow, reflective rain cover with locking cinch cord included
MAIN BAG
(3515-0171, 3515-0172, 3515-0173)
1.
Refer to diagram below. Use the included mounting rods to adjust the width of the Crus’n Deluxe
Sissybar bag mounting strap to fit snugly around your bike's sissy bar pad. The mounting rods
can be inserted to make the strap narrow or wide. You can also insert the rods at an angle if your
sissy bar pad is not rectangular. If you have a very large Sissybar pad, a Jumbo Pad Extension
Mount has been provided. This mounts onto the mounting rods and is used in lieu of the attached
mounting strap.
2. Make sure the mounting rods are fully inserted, through the upper mounting loops and solidly into
the lower mounting loops. Once in place, tightly close the hook and loop retention flaps that are
above each set of upper mounting loops.
Yoke Security D-ring and Ladder Lock
Mounting Rod
Mounting Strap
Hold Down D-ring
Sissybar Yoke
Retention Flap (Upper Mounting Rod
Loops under Retention Flap)
Lower Mounting Rod Loops
Upper Backpack Strap D-ring
Roll Bag Strap Ladder Lock
