SACKit Move 150, User Manual

Page: 6 / 21

6
STEREO PAIRING: CONNECTING TWO SACKIT MOVE 150 SPEAKERS
If you have two SACKit Move 150 speakers it is possible to create a stereo pair with one speaker
playing left channel, and one speaker playing right channel . Watch video: https://www .youtube .com/
watch?v=GYCu1w2zSOk
1 . Power on both speakers clicking the Power button
2 .
Click quickly the Bluetooth button three times to enter pairing mode (the indicator light will flash in
correct pairing mode) . Repeat this for both speakers
3 . The speakers will connect in a few seconds. A constant light on one speaker and a slowly flashing
speaker on the other indicates correct connection .
LINE-IN MODE
Play music via the included audio cable by plugging it into the LINE IN input on the back of the SACKit
Move 150 speaker and into your device . The SACKit Move 150 speaker will automatically change to
Line-in mode when you plug the audio cable into the speaker .
Control your music via the on-speaker controls:
• Adjust volume: short press or long press ”Vol-” and ”Vol+” buttons to adjust volume .
• Mute: Stop playing music from the speaker by pressing the “Play/Pause” button
CHARGING
You can charge smaller devices via the USB port on the back of the SACKit Move 150 speaker . All you need
to do is connect the speaker and your device via a USB charging cable (not included), and your device will
automatically start charging . If charging does not automatically start, please press the “Power” button . The
USB port is designed for charging devices that support 5V DC, 1A .
Note:
Phones cannot be charged through the speaker, and it may reduce battery life if the speaker is not
plugged into a power outlet .
CHANGING THE FRONT
Change up the look of your speaker with the changeable front – do you want it classic chic, matching the color
of your sofa or should it pop with an eye-catching color? It’s up to you!
1 . Remove the front by pulling the SACKit leather label . When you have loosen the corner of the front,
you will be able to loosen the front all the way around the edges and finally remove it completely. Please
note: The front is attached thoroughly to ensure sublime sound quality . The leather label is fastened with
screws, and it is designed for using when removing the front .
2 . Attach the new front by placing the “sticks” into the matching holes . Press the front onto the speaker all
the way around the edges - and your new look it ready!