6
C
A
B
D
E
F
CHARGING THE LAMP
1 .
Open the lamp by turning the handle (A)
clockwise until you can remove the handle
from the lampshade (B).
2 .
Then remove the battery pack from the
lampshade. This is done by pushing the two
clamps (C) together and then the battery pack
can be pulled out.
3 .
Now charge the battery pack with a USB-C
cable in the socket (E) or wirelessly by placing
the flat side (F) down against the wireless
charger.
4 .
The LED (D) on the battery pack will indicate
charging with a red light, which changes to
green when the battery is fully charged.
5 .
The battery pack on 5.200 mAh will fully charge in 6 hours, while 3-5
hours is enough the first time.
6 .
The battery pack can now be placed in the lampshade (B) and the
handle (A) can subsequently be screwed on.
NOTE:
Choosing the correct USB adaptor is very important for your sa-
fety and the function of the battery pack. As a minimum, you need to use
a USB adapter with the following output: 5V / 2A. For wireless charging,
you will need a 10W wireless charger that fits it.
Never charge the battery pack in or near water!
