6
How to use Bluetooth
1 .
To enter Bluetooth mode, press the Mode/Menu button (C) until ”BT” is displayed. The screen will
then display ”Connecting” and a voice will say ”Bluetooth mode”. SACKit Go 300 is now waiting for
connection.
2 . Switch on Bluetooth on your device
3 .
Choose “SACKit Go 300” under Bluetooth settings on your device. Your speaker is now connected
to your device .
4 . Start playing music on your SACKit Go 300!
5 .
SACKit Go 300 will automatically pair with the last connected device
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunities won’t appear on the new device.
THE DEVICE
How to use FM-radio
Make sure that the radio antenna is extended before entering
FM
mode .
1 . To enter
FM
mode, press the Mode/Menu button (C) until ”FM” is displayed.
2 .
Press and hold the left arrow (<) or right arrow (>) to scan for channels. The scan stops automatically
when the next station is found.
3 .
Alternatively, press the left arrow (<) or right arrow (>) to tune up or down between the channels at
0 .05 MHz per tap .
4 .
Pressing the Power button (B) while in
FM
mode, will mute/unmute SACKit Go 300.
Getting started
Follow these three simple steps to get started:
1 . Charge SACKit Go 300 in the USB-C port (D) with the included USB-C charger cable .
2 . T
urn on SACKit Go 300 by holding down the Power button (B).
3 .
Select the mode you want by pressing the Mode/Menu button (C).
Note:
It may be necessary to unfold the antenna on the back to get sufficient signal when listening to
the radio .
Disconnect Bluetooth
You have to be in Bluetooth mode to disconnect.
1 .
To disconnect the Bluetooth connection to a device, press and hold the left arrow (<) or the right
arrow (>) until hearing ”Disconnected”.
2 . SACKit Go 300 is disconnected and is now ready to pair to a new device .
