6
BATTERY AND CHARGING
Please use the adaptor supplied with SACKit Boom 150 for charging, the adaptor power is 15V/2A.
Do not use any other power adaptor.
• Before use you should charge the speaker for at least 6 hours to obtain full battery capacity.
• If the speaker is fully discharged it will take 3 hours to fully charge the internal battery.
• When charging the power led will illuminate and will turn off when fully charged.
• Please remember to turn off the speaker when not in use.
BLUETOOTH CONNECTION
1. Turn on speaker by turning the Volume/ON button clockwise.
2. Turn on Bluetooth on the device you want to connect.
3. Choose “SACKit Boom 150” in the Bluetooth settings on your device. Enter pin ‘0000’ if asked.
4. Start playing music from your device.
5. To disconnect the existing device connected to your SACKit Boom 150 double click ”Source”.
6. If you have two SACKit Boom 150 connected in wireless stereo, you need to disconnect the
second speaker before you will be able to disconnect your device.
CONNECT TWO SACKIT BOOM 150 IN WIRELESS STEREO
It is possible to create a stereo pair between two SACKit Boom 150 speakers.
1. Turn on one speaker and connect to it to your phone or other device with Bluetooth, this SACKit
Boom 150 will be the left speaker in the stereo setup.
2. Turn on the second SACKit Boom 150.
3.
Press and hold the “Source” button on the first S
ACKit Boom 150 until you hear a sound and the
LED on both SACKit Boom 150 turns blue.
4. The two SACKit Boom 150 are now paired in stereo.
Disconnect:
To disconnect the paired SACKit Boom 150, press and hold the “Source” button on any of
the SACKit Boom 150 until you hear a sound and the “Source LED” on the second SACKit Boom 150
begins to blink.
LINE IN MODE
Connecting the speaker to another unit using line in.
• Connect a mini jack connector (not included) first to the source then to your
SACKit Boom 150.
• Turn on your speaker by turning the volume button.
• If the ‘AUX/Bluetooth’ LED is bright blue (indicating Bluetooth connection), press the ‘source’ button
once and the ‘source LED’ will go from blue to green (indicating line in mode).
