- 13 -
Video 60 Plus EFP
Manual
1
Safety instructions
➪
When the camera is mounted, the clamping screw of the
Video 60 Plus EFP must only be released if camera and tri-
pod are secured against falling over.
➪
When placing the camera plate into the Video 60 Plus EFP,
make sure not to hold fingers within the range of the locking
lever, since it will snap back.
➪
When releasing the vertical brake make sure that the came-
ra is secured against any sudden movement.
➪
Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
➪
Before transport reset fluid damping to “0”
2
Operating elements
safety lock of
Touch & Go system
horizontal brake
horizontal setting of
fluid damping
counterbalance knob
Touch Bubble
flange for viewfinder extension
lock of the sliding balance plate
clamping screw of the
fluid head
rosette for moun-
ting pan bar
