1
2
3
5
4
6
7
11
10
9
8
7
6
5
4
3
2
1
0
- 11 -
Video 25 Plus / FB / Horizon Plus
Manual
1
Safety instructions
➪
When the camera is mounted, the clamping screw of the
fluid head must only be released if camera and tripod are
secured against falling over.
➪
When placing the camera plate into the fluid head, make
sure not to hold fingers within the range of the locking lever,
since it will snap back.
➪
When releasing the vertical brake make sure that the camera
is secured against any sudden movement.
➪
Do not operate the fluid head upside down without the
necessary securing devices, i.e. ropes etc.
2
Operating elements
horizontal setting of fluid damping
vertical brake
lock of the sliding
balance plate
locking lever of
Touch & Go system
vertical setting of
fluid damping
counterbalance knob
Touch Bubble
horizontal brake
battery holder of
the Touch Bubble
clamping screw of
the fluid head
safety lock of Touch &
Go system
rosette for
mounting pan
bar
flange for viewfinder
extension
lever for 1/2 counter-
balance spring
tilt safety lock
Video 25 Plus:
Horizon Plus 16:
Horizon Plus 35
V 25 Plus FB:
150mm half ball
2 pan bars
brake in the front / bubble in the back
Touch & Go plate: 16
viewfinder extension bracket
same as Video 25 Plus, but only 1 pan bar
same as Video 25 Plus, but only 1 pan bar
and Touch & Go plate: 35
flat base. 2 pan bars
brake in the back / bubble in front
Touch & Go plate: 35
without prompter thread
Fluid Head Specifications:
