15
Installation
Additional C of G Adjustments
If it is not possible to correctly set the C of G of the payload using the
standard method:
1 .
Move the camera plate to offset the payload further in the required
direction.
2 .
Use the C.O.G plate (# 1063) which is available as an accessory.
Adjusting the Counterbalance
The fluid head is equipped with a 16 step counterbalance adjuster
to accurately balance the payload. Note, moving the counterbalance
from one setting to another requires the head to pass the horizontal
position to take affect.
1 .
Set the counterbalance adjustment knob to the mid-range setting
(8).
2 .
Tilt the payload approximately 30° in both directions and release
it. If the payload stays in the same position when released, the
payload is correctly balanced.
