19
Installation
Fine balance and temperature correction may be achieved by adding
or removing trim weights (7).
8
!
WARNING!
Do not reduce pedestal pressure below 3.5
bar (50 psi). This ensures that the elevating mechanism
remains in tension.
!
WARNING!
The Schrader valve cap (3) forms a primary
pressure seal. Always replace the cap and screw it down
finger-tight.
A correctly pressurized pedestal will balance its payload such that
it can be moved to any position over the full on-shot stroke of the
moving column, with minimum effort, and it will maintain its position
when the steering ring is released.
