Manual
SOOM
- 7 -
Dismantle the TriSpread from the TriPod, as
described in chapter 3.3.
Mount the SOOM clamping bowl into the ring bowl
from bottom until it snap in place, as described in
chapter 3.5.
The height range can be adjusted via extension of
the arms and by adjusting the arm angles.
Angle setting:
Fold them to the inside (1) to release the pressure
on the arms of the TriSpread.
Turn the ring at the top of the ring bowl in the
desired direction (2).
TriSpread should always be set to HIGH or LOW
position. It is not intended to function at positions
between these settings.
picture 5
