Sachtler DV 10 SB, Manual

Page: 11 / 26

Manual DV 10 SB
-5 -
Centre the camera weight and compensate for a
backheavy setup by
sl iding the cameraplate/balance-
plate forwards and for a frontheavy setup by sliding
backwards. The camera should remain in the horizontal
position.
Á
Lock the cameraplate/balanceplate by turning the red
wing screw clockwise and tighten it.
Á
If you can’t manage to centre the camera correctly,
please read paragraph 5.1 “Camera plates”.
Á
The fluid head DV 10 SB is equipped with a twelve step
counterbalance adjustment. Select the setting which
compensates best with your camera set up. Adjusting
the lower setting comes immediately effective. The
adjustment of the higher setting becomes effective after
passing the “0” level while tilting the fluid head.
3.6 Setting of the damping
The DV 10 SB is equipped with five damping levels hori-
zontally and vertically and a zero setting.
By turning the vertical setting and the horizontal setting the
desired level of the fluid damping is selected.
Turn the setting ring to “0” in order to switch off the dam-
ping completely.
Make sure that you always turn the setting to the next
indexed position (arrow). Engage the retainer pins by
slowly panning or tilting the camera.
ATTENTION: Panning or tilting the camera with settings
between the indexed positions can damage the retainer
pins and/or disks