15
Operation
Dismounting the Fluid Head
To release the head from the tripod, lift the SpeedLevel Lever to the top
and lift the head away from the tripod.
With the head removed carefully lower the SpeedLevel Lever.
Levelling the Fluid Head
1 .
To level the head lift the SpeedLevel Lever until the head is free
(do not lift above the detent position, this will ensure the head
remains latched to the Bowl Connector).
2 .
View the bubble from above, or through the horizontal prism
window (in poor light conditions operate the illumination for a
better view).
3 .
When level, lower the SpeedLevel Lever. Check level and
re-adjust if required.
CAUTION! Push the SpeedLevel Lever fully closed against the
head body before use .
