Connect the head to the column by tigh-
tening the 3 screws with the supplied
allen wrench. Make sure that it is moun-
ted securely.
6.5 Adjusting the C III
Mount camera and accessories before
you start to pressurize the column.
Release column lock (red lever to green
dot)
As some pressure is already applied at
the factory, the centre column may now
move upwards. You can check the pres-
sure with the pressure gauge at the
column.
Push down the center pin of the Schrader
valve with the back of the valve cap and
release air until the camera is held in
position. If the center column won´t hold
the camera and moves downward mount
the enclosed pump by pressing it straight
and firmly onto the valve. Pump in a few
strokes until the centre column will stay at
the desired height. A safety valve is instal-
led in the system to prevent overpressu-
ring the column.
- 5 -
C III
Manual
Allen Wrench No 4 mm
Summary of Contents for 5195
Page 1: ...C III Manual Benutzerinformation Code 5195...
Page 12: ...Manual C III 8...
