18
19
SFM 649 008.1
1
2
SAFETY TEST
Checking the tyre profiles
WARNING
Observe the minimum profile depth
prescribed by law.
- Measure the profile depth at the centre
(1) of the tyre’s tread.
Recommended minimum profile depth:
Front 2.0 mm
Rear 2.5 mm
Checking the tyre pressure
WARNING
Adjust the tyre pressure according to
the total weight load. Never exceed the
rated total weight or the bearing capacity
of the tyres.
Incorrect tyre pressure will have a con-
siderable effect on the riding properties
of the motorbike and the lifespan of the
tyres.
Tyre profile, tyre pressure and size
WARNING
Never ride without valve caps. Firmly
tightened valve caps prevent the tyre
from suddenly losing pressure.
- While the tyres are cold:
- Twist off the valve caps.
- Check/adjust the tyre pressure.
- Twist on the valve caps.
Tyre pressure
Solo
With
passenger
Front 2.0 bar 2.2 bar
Rear 2,5 bar 2.7 bar
Tyre size
The standard motorbike is provided with the
following tyre sizes:
Front 90/90-16 48J
Rear 120/80-16 60J
WARNING
Use only tyres approved by the
manufacturer. The use of non-approved
tyre brands, types or sizes leads to the
operating permit of the vehicle becoming
null and void. Use only pairs of tyres
produced by the same manufacturer.
TECHNICAL DATA
