© 2022
Step 2 of 4
Order #XXXXX
Locked layer contains
placeholder marks.
Wing
Wing
Wing
Wing
FRONT VIEW
*
Slide light onto clip then lock clip
into groove of horizontal extrusion.
Clip
Light
Light Connection
Clip
Light
Horizontal Extrusion
Monitor Mount Attachment
*
Slide V4 Connectors into groove
of Extrusion. Tighten Set Screws
to secure connectors in place.
Attach Monitor Mount back
piece to Extrusion, using bolts.
Then slide monitor mount into back piece.
Connectors
V4
Connectors
Bolts
Monitor
Mount
Back
Piece
Item
10
10A
11
11A
Qty.
2
2
2
2
Description
30.2” Curved Extrusion
Support Leg
12.184” Horizontal Extrusion
Counter Mounting Plate
2D
2C
2B
2A
3B
3A
3D
3C
Clamp
11A
10
10A
Screw
Shelf
11
11A
10
10A
Screw
11
*
*
*
*
*
When Assembled
Steps:
1) Connect lights to top horizontal extrusions. See
Light Connection
detail.
2) Attach extrusions [10/11] to verticals [2A] & [3A]; connect shelf to vertical [2A].
3) Attach support legs [10A] to curved extrusions [10].
4) Attach flange plates [11A] to top of curved extrusions [10], using bolts.
5) Attach counter tops to counter mounting plates [11A]. See Counter Assembly page.
6) Attach Wings to A10 clamps. See
Clamp Attachment
detail.
7) Attach Monitor Mounts to verticals [2B] & [3B]. See
Monitor Mount Attachment
detail.
*
1) Slide connector of clamp into
extrusion groove.
2) Tighten set screw when A10 is in
desired location.
3) Insert wing into clamp.
4) Tighten knob on clamp to secure wing
in place.
Clamp Attachment
Connector
Knob
Set Screw
A10
Clamp
Keep A10 clamps
attached to verticals.
Backwall Attachments
