© 2022
Step 2 of 3
Order #XXXXX
Locked layer contains
placeholder marks.
*
Connector
Sign Attachment
Cap
Sign
Standoff
Slide connector into groove of extrusion.
Tighten set screws to secure in place.
Screw standoff into connector. Place
sign between standoff and cap then
tighten cap to secure sign.
*
Slide light onto clip then lock clip
into groove of horizontal extrusion.
Clip
Light
Light Connection
Clip
Light
Horizontal Extrusion
Wing
Wing
3B
3A
2B
2A
Clamp
Wing
Wing
Knob
Set Screw
Connector
1) Slide connector of clamp
into extrusion groove.
2) Tighten set screw when
A10 is in desired location.
3) Insert wing into clamp.
4) Tighten knob on clamp
to secure wing in place.
Clamp Attachment
A10 Clamp
Keep A10 clamps
attached to verticals.
Keep curved extrusion [
10
]
& horizontal [
11
] assembled.
FRONT VIEW
Monitor Mount Attachment
Connectors
V4
Connectors
*
Slide V4 Connectors into groove
of Extrusion. Tighten Set Screws
to secure connectors in place.
Attach Monitor Mount back
piece to Extrusion, using bolts.
Then slide monitor mount into
back piece.
Bolts
Monitor
Mount
Back
Piece
Steps:
1) Connect lights to top horizontal extrusions [5A/5B]. See
Light Connection
detail.
2) Attach assembled Header Frame and affix graphic using Velcro.
3) Attach extrusions [10/11] and shelf to verticals [2A] & [3A].
4) Attach support legs [10A] to curved extrusions [10].
5) Attach flange plates [11A] to top of curved extrusions [10], using bolts.
6) Attach counter tops to counter mounting plates [11A]. See Counter Assembly page.
7) Attach Wings to A10 clamps. See
Clamp Attachment
detail.
8) Attach Monitor Mount to vertical [2B]. See
Monitor Mount Attachment
detail.
9) Attach Sign to vertical extrusion [3B]. See
Sign Attachment
detail.
Item
7/8/9
10
10A
11
11A
Qty.
1/1/1
2
2
2
2
Description
Header Frame
30.2” Curved Extrusion
Support Leg
12.184” Horizontal Extrusion
Counter Mounting Plate
Keep header
frame assembled,
when packing.
7
8
9
Velcro on extrusions
must face to
BACK
of
assembled Header.
*
*
Graphic
11A
10
10A
Screw
Shelf
11
*
*
*
11A
10
10A
Screw
11
When assembled
Backwall Attachments
