w w w . c l a s s i c
e x h i b i t s . c o m
Step 2
Page 2 of 2
866.652.2100
© 2012
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #xxxxx - Sacagawea - Counter and Wing Attachment
Slide A10 Clamp
into groove
of square extrusion.
When desired location
is found, tighten
set screw to secure.
Set-
Screw
A10
Tighten black plastic
set screw to secure
Wing in place.
Black Plastic
Knob
Wing Attachment
Keep A10 clamps
attached to verticals
7
8
9
Note:
Curved extrusion
[10] and horizontal [11]
stay assembled for
shipping and packing.
10
10a
11
Screw
11a
Counter Top Attachment
Insert screws located on underside
of counter into holes on flange plate
and secure with wing nuts.
Wing Nut
Attach graphic
to
velcro
on back of
header frame
Item
7/8/9
10
10a
11
11a
Description
Header Frame
30.2” Curved Extrusion
Leg Support
12.184”w Horizontal Extrusion
Flange Plate
Qty.
1/1/1
1
1
1
1
Note
: Header frame ships
and packs assembled
Steps:
1) Attach lights as indicated.
2) Attach assembled header frame and apply graphics as shown.
3) Attach assembled counter supports [10/11] to vertical where indicated.
4) Attach support leg [10a] to counter support [10/11].
5) Attach flange plate [11a] to top of curved extrusion [10] as shown.
6) Attach counter top to support, see
counter top attachment
detail.
7) Attach wings to A10 clamps as shown.
*
*
*
Light Connection
Attach lights to
backwall where
desired and
tighten in place.
